Saw parameters to define the boards that can be processed automatically
These parameters are only available for saw model 26 HOMAG flexTec CADmatic 5 and appear on the Cutting 3 tab.
These parameters are used to define the minimum and maximum board dimensions, thickness and weight that can be handled automatically by HPS flexTec. If board rotation is allowed the optimiser assumes that patterns using a rotated board can be processed automatically if the dimensions of the rotated board obey the restrictions but the dimensions of the un-rotated board do not.
e.g.
min length = 1200mm, max length = 3200mm min width = 400mm, max width = 1220mm
min thickness = 8.0mm, max thickness 60.0mm and max weight 180kg
