CADmatic specific information box
Enter the grooving information to groove the part
at the rear according to the settings at the CADmatic. Please consider
the following syntax for the communication of the groove details:
GrooveWidth |
0 = no groove 1 = insert standard groove 8.3 = insert 8.3mm groove |
DistanceToEdge |
Dimension in mm |
Depth |
Dimension in mm |
GrooveReference |
0 = GrooveOuterEdge 1 = GrooveCenter 2 = GrooveInnerEdge |
FeedDimension |
Dimension in mm, must be smaller than saw blade thickness |
Direction |
0 = longitudinal groove 1 = transversal groove |
GrooveInsertATBackSide |
0 = FrontInsert 1 = BackInsert |
Examples:
Empty box |
No groove |
0 or N,n |
No groove |
1 or Y,y,J,j |
Standard groove with default values of cutting plan editor |
5.2 |
5.2mm groove (further values from default) |
8:12 |
8mm groove : 12mm distance (further values from default)
|
8:12:10 |
8mm groove : 12mm distance : 10mm depth (further values from default) |
8:12:10:1:2.4:1:1 |
8mm groove : 12mm distance : 10mm depth : edge distance refers to the center of the groove : 2.4mm feed : transversal groove : groove is inserted at the back |
8:12::::1 |
8mm groove : 12mm distance : transversal groove : groove is inserted at the front (missing values from default) |
