Machining centre transfer parameter to specify the tool settings of the back instruction trim cuts
Machining centre transfer parameter to specify tool settings of the trim cuts to define the split between the first and second set of nested pattern machining instructions.
Enter the tool number, speeds, and other rout tool box options.
Use the command format, with each option separated by a colon character, for example:-
T=2:A=2:F=4
If no values are set for the approach and withdrawal (A= : W=) the default values A=2 and W=2 are used.
The Tool settings can also be entered at the Tool dialog
Note
This value can be overridden by Material parameter settings at material level.
