Saw parameter to setup the 'Free cut' option
Free cut optimiser only
Minimum length - If you are optimising with the Free cut optimiser you must set the minimum length for the larger piece (main) after the free cut. Make sure that this value is equal to or more than half the large board size. For example, if the large board size is 5600mm (220 in.) the minimum size of the main piece must be at least 2800mm (110 in.).
Maximum length - Enter the maximum length for the larger piece after the free cut. For example, to ensure that no board is produced by the free cut which exceeds a maximum saw cutting length of 4100mm (161 in.) enter a value of 4100.
|