This occurs for 'Transfer to Saw' when the number of boards in the board list exceeds the maximum number of board types allowed
The number of board types is the number of lines in the board list. Different saw models allow different maximums. For example, for some older controllers there may be a maximum of 25 or 99 board types and for some controllers there is a maximum for the combined total of the number of boards and the number of parts.
This problem is usually caused by using offcuts or large mixed material lists.
Check the maximum allowed for your saw model and transfer mode and delete lines from the board list as necessary
A large list may need to be split into several different lists.
|
35034 |