May occur for Optimising
Use one board list per batch
The program can be set (System parameters) to use a single board list for a batch of part lists. The offcuts from one run are passed into the board list and are available for the next run in the batch.
For this to work each cutting list in the batch must use the same board list (the same name).
This errors indicates that the board list names are not all the same (the batch may have been edited).
The program returns to the batch screen and the cursor indicates the problem run(s), that is, the location next to the first change of board list name encountered.
Check batch contents and System parameters.
Rectangular nesting – Board precut
The rectangular nesting optimiser can be configured to automatically divide (precut) boards to fit the nesting table.
The board list used for a rectangular nesting run configured for board precut cannot be used by another run in the batch.
Create separate board lists for each nesting run configured for board precut.
35064 |