Data not correct - limits and sizes

 

Occurs when a run is optimised and the Board limits are set to use the boards in a fixed ratio but not all the parts fit all the boards

 

This message warns that the ratios may not be obeyed

The optimisation usually completes.

 

Check data and re-try

 

For the ratios to work all the parts must be physically able to fit all the boards taking account of trims etc.

 

The following data illustrates this problem. In this case the first part (PART/1) does not fit the second board (BOARD2).

 

Part       Material      Size           Qty

PART/1      CHIP/01  2050.0 x 320.0     100

PART/2      CHIP/01   650.0 x 450.0     150

 

Board          Size           Qty      Limit

BOARD1    2440.0 x 1220.0     5000       1

BOARD2    1850.0 x 1220.0     3000       1

 

 

37054