Data not correct - grain

Grain value is not correct or does not match another setting

There are several causes:-

●  When importing board information to a board list from an external file in BDX format this error is reported if the grain field does not have a correct value. The values in the file must be 0 1 or 2 for this field.

0=No

1=Yes

2=X

●  When editing or creating duplicate stacks in Review runs the new duplicate grain field does not match the grain setting for the board. The part is NOT added to the list of duplicates.

●  When using the pattern editor to move parts between patterns the grain of the part moved must be consistent with the grain of the pattern. If the part does not fit in the correct orientation this error is reported.

- Check the grain settings of parts and boards