Data not correct - batch board list & offcut reuse

 

May occur when Optimising

 

The program can be set (System parameters) to use a single board list for a batch of part lists. The offcuts from one run are passed into the board list and are available for the next run in the batch.

 

This error indicates the boards/offcuts used in a run do not match the offcuts produced in previous runs in the batch.

 

Typically this is caused by some of the patterns being edited (or the parameters changing) and this has changed some of the offcut sizes in the patterns.

 

The results are no longer correct.

 

Check the data and re-try the operation

 

 

37096