Data not correct - repeat not allowed in rout

 

This occurs on 'Transfer to machining centre' when a rout on a part contains a repeat

 

A repeat is not allowed for routes for most machining centres. That is, each route must be a separate instruction.

 

Check the drawing in the machining library.

 

The following information for a rout illustrates this problem. Note that, you can enter repeats in the drawing but they have no effect.

 

Function      Groove Router

Description   G1

Xstart        100

YStart        100

Xend          400

Yend          400

Direction       0

Width          20

Depth           8

Repeat          3

 

 

38043