Data not correct - trim too large

 

Occurs when optimising a part list or product requirements list and one or more of the optimising and saw parameters settings for trims is set to a value greater than the longest board dimension of the boards in the board list

 

This usually indicates that the trim or the board size is not correct - check the data.

 

This can be a problem when using relatively small offcuts.

 

For example if the saw parameter: 'Minimum size of first cut is set to 4000' the following board list illustrates this problem.

 

Board          Size            Qty

B1         3050 x 1220        1000

B2         2440 x 1220        1000

B3         3660 x 1850        1000

 

 

38073