Core oversize for laminating 

 

Edging parameter for laminates

 

Enter the core oversize values for laminating. Enter separate values for the overlap in the length and the overlap in the width. These values are added to the core size for a laminated part for each edge.

 

Core oversize - length

 

 

Core oversize - width

 

 

This value allows for the core to be re-trimmed prior to edging. If the edging material is set in the Edging library to 'Laminate before edging' these core oversize values are not used.

 

The total core oversize is the sum of the 'core trim' (set in the edging library against each edging material) plus the 'core oversize for laminating'.

 

 

See also