Review runs report on edging materials
At the Review runs screen:-
● Select: Summaries - Edging
or
Select the Toolbar option
The Edging summary is shown as one of the summaries in the Review runs option or the Print reports option.
Use the navigation buttons to move between reports.
adjust on-screen column and
row width
zoom display in / out
print current report
exit
For full details of the on-screen options see help topic: Review runs screen
Shows the full details of the linear edging required for a run. This is usually tape or thin laminate strips. The items are as follows.
No. number of edging material in edging library
Code edging material code
Description edging description
Material material code for edging material
Thk edging thickness
Cost/area cost per unit length (Metres or Ft)
Length total length (metres or Ft)
Cost total cost
The bottom of the report shows the total linear requirements and cost. These are the linear edging requirements for the run. Only edging material with a function code of 1 for linear edging is shown in the edging summary.
Total Edging length - This is the total linear length of edging material required. The length is expressed in metres or feet. The total length of all material is shown at the bottom of the summary. This is sometimes used as an estimate of throughput for the edgebander for this job.
Total Edging cost - This is the total cost of the edging for each edging material expressed in the appropriate currency value (e.g. pounds sterling, US dollars) to two decimal places. The total cost of all material is shown at the bottom of the summary.