Machining centre parameter - Tool setting
Vertical drilling - Enter the entry and exit speeds for vertical drilling. The first digit is the entry or exit speed and the second for speed through centre of material. 0 is slow and 1 is fast. For example: 00 (S=00). If you do not drill all the way through a part then you only need to specify the first digit. The default is SLOW both sides (S=00)
Pass and routing - Enter the Revolutions per minute (RPM) as a percentage of the default RPM. For example, 55 means 55% of the default RPM setting.
(For WoodWop 4+you can also use Absolute spindle speed).
