Cutting speed 

 

Machining centre parameter - speed for rout

 

 

Enter the speed of the rout in linear measurement (e.g.: feet per minute, metres per minute).

 

The time for each rout depends on the fixed time, the overall length of the rout and the speed of the router.

 

For arcs and circles the length of the rout is calculated as the perimeter of the arc or circle..

 

Note:

 

For nested patterns the calculation of the dividing time is base on these parameters

 

- Loading time per board

- Time to take off each part

- Tool in/out (pattern dividing times)

- Cutting speed (pattern dividing times)

- Rapid Speed

 

The speed values in the machining library tooling options (e.g. Feed speed, spindle speed) are not used when calculating the pattern dividing times.

 

Notes

 

- Can also be set as a Material parameter at material level.

 

 

See also