Machining centre parameter - define how rout lines are shown
Show width
Check box to show width
Sets whether the rout is shown as a single line or the full width of the line is shown. If a single line is shown - it is the centre (or defining) line of the rout.
Direction and Path
Check box to show direction and path
An arrow shows the direction that the rout is cut, and when the path or the rout is set to left or right (RK=1 or RK=2) another arrow shows which side of the defining line the rout is cut. Not for centre path routs.
Applies to: circle, arc, groove routs and saw grooves