Note of all the material parameters
The material parameters are split over several tabbed sections. The following is a list of all the material parameters. Not all parameters are available as material parameters.
Trims
Optimiser type
Saw blade thickness
Minimum rip trim (inc. saw blade thickness)
Minimum crosscut trim (inc. saw blade thickness)
Override rip trim
Override cross cut trim
Retrim after head cut (inc. saw blade thickness)
Minimum trim dimension for recut - front / rear (inc. saw blade thickness)
Limits and Speeds
Max different boards
Max boards per bundle
Largest cuts first
Narrow strips in the middle
Minimum block length after head cut - main / head
Cutting height - Minimum
Cutting height - Maximum
Minimum Board dimensions for head cut / rotated patterns
Maximum Board dimensions for head cut / rotated patterns
Max book for faster operation - Measurement
Max book for faster operation - Number of sheets
Load time per bundle
Pre-stacking time per sheet
Saw loading - Front / Rear
Pre-stacking table
Spare parameter
Speed - Head cut
Speed - Rip
Speed - Crosscut
Rules
Recut settings
Head cut settings
Board orientation
Allow full sheet overs
Create Crosscut only patterns
Allow part to be cut from multiple strip widths
Single strip patterns
Offcuts and Waste
Minimum offcut length, width, area
Preserve orientation of non-grained offcuts
Consider grained offcuts in both orientations
Maximum offcut dimension (on one side)
Plus part preference
Width of packing strips - Multi-axis saws
Min length packing strips - Multi-axis saws
Consider offcuts
Consider automatic offcuts
Use Offcuts first
Offcuts from recuts
Offcuts at end of cutting phase
Offcuts 2
Maximum manual offcut dimensions and area
Offcuts for automatic storage
Maximum offcut dimension (material flow direction)
Offcut division preference
Offcut preference
Tension trims
Tension trim type
Slot / notch width
Distance of slot from edge
Length of middle bridge
Overall width including thicknesses
Extra time for tension trim
Reserve material for tension trims
Placement from edge or centre of board
Max distance from edge / centre
Max distance from edge / centre (rotated board)
Minimum distance between tension trims
Tension trims for
Minimum length of tension trim
Minimum length of tension trim (rotated board)
Nesting 1
Minimum part separation
Board orientation - Nesting
Nesting origin
Board margins
Override margins for large parts
Offset small parts from edge
Min. area for nesting on the edge
Min. offset from the length edge
Min. offset from the width edge
Use global step angle
Global step angle
Nesting 2
Board sequence
Approach length
Fill to top of box
Create identical cutting patterns
Time for optimisation - Basic
Time for optimisation - per Workpiece
Time for optimisation - Cancel time
Board template
Spare parameter - Nesting
Nesting 3
Min. area for sequence by path
Origin for sequencing
Board variables globally for all programs
Tool optimisation template
Processing template - start program
Processing template - end program
Priority mode
Offcuts (Nesting)
Minimum offcut dimensions - Nesting
Maximum offcut dimensions - Nesting
Offcut grid (nesting)
Nesting direction
Offcut direction
Offcut template
Process offcuts
Offcuts for automatic storage - Nesting
Waste cuts - grid
Consider offcuts (Nesting)
Consider automatic offcuts - Nesting
Use offcuts first (Nesting)
Part Division
Rout Type
Diameter of cutting tool
Include Tabs
Max distance for single tab
Tab length
Tab thickness
Tab style
Apply tabs to small parts only
Routing
First pass routing - max area of part
First pass routing - border area
First pass routing - max smallest side
First pass routing - thickness
First pass routing - Tool settings
Final pass - Depth offset for dividing cut
Final pass - Tool settings nested patterns
Offcuts - Depth Offset
Offcuts - Tool settings
Tool sequence parameters
Loading time per board
Time to take off each part
Tool in\out
Cutting speed
Rapid Speed