Saw transfer parameter to set the name of the transfer program
The transfer program is different and has a different name for each type of saw transfer and not all types of transfer require a program name.
The action of the saw transfer program varies but the basic process is to take the data from the location set by the Path (saw transfer parameters) parameter and convert it to a suitable format for the saw controller and transfer it to the saw.
BAT files - the optimising program looks for the transfer program in the following directories in this order: User Profile, Program directory, Path specified by the Environment variable PATH.
EXE or COM files - the optimising program looks for the transfer program in the following directories in this order: Program directory, User profile, Windows system directory, Windows directory, Path specified by the Environment variable PATH
The default extension is EXE. Only BAT, EXE or COM extensions are allowed
Some transfer modes do not require a program name. Check with the supplier for the latest program names and other Set up details.
Feedback data - To read feedback data from a floppy disk choose a 'A' for the Path value and leave the Program name blank.
A full path and program can be set. e.g. c:\V12\saw\sawtrans.bat
Note
- If any stand alone commands are to be run directly from the Auxiliary menu, Automatic command files, Saw transfer (program name) or Machining transfer (post transfer program) areas of the software then any equals sign "=" should be replaced with a colon ":".
