Machine before edging - information box

 

Information box for machining

 

Use this to select whether parts are machined before edging on a part by part basis or on the basis of the Machining centre parameter: Machine before edging.

 

If an information box is set to this information box type the parts are checked on a part by part basis. If the box contains '1' or 'Y' the part is machined before edging otherwise the part is not machined before edging.

 

If an information box is not set to this type the setting of the machining centre parameter is followed.

 

This applies to all transfer modes

 

 

See also