Picture filename - information box 

 

Information box for machining

 

The CADmatic 3 saw controller can print labels for parts at the saw using either the LPC format file or general Windows bitmap and metafile formats: bmp, wmf and emf.

 

If you are using bmp, emf or wmf files for some or all part pictures set this box so that the pictures are transferred to the CADmatic 3 in these formats.

 

Also set this box if you use Homag MPR(X) format files for part pictures. These are automatically converted to wmf format as the data is transferred to the saw.

 

If the box is NOT set part pictures are transferred in LPC file format. Note that the transfer process only converts pictures in the Machining or Drawing libraries to LPC format.

 

This box is used by the CADmatic software to specify the filename shown during label printing. It is only for use by the CADmatic software - do not enter anything in the box, for example, when using the part or product requirements lists.

 

The image files are copied to a directory named: 'bitmaps' which is a subdirectory of the 'Path for saw data'.

 

CADmatic software - specify which information box is used for the Picture filename

 

 

See also