Distance of slot from edge

 

Saw parameter to set how a slot is positioned for a tension trim

 

saw_param_tension_edge.png

Applies to CADmatic 3

 

For slot type tension trims enter the distance of the slot from the edge of the board.

 

The value is a measurement (range 5mm - 500mm / 0.188 inches - 20 inches)

 

 Enter a value

 

For example: 350 (mm)

 

 

Notes

 

- Can also be set as a material parameter at both board and material level

 

- This parameter is only enabled when the relevant tension trim type has been selected.

 

 

See also