Authentication

 

Saw transfer parameter to set values for establishing a link to a machine

 

The parameter is shown on the right hand pane at the saw transfer parameter screen and is only required for some saw modes. Select the correct saw transfer mode(s) before attempting to set this parameter.

 

Controllers with Windows networking (CADmatic 3/4/5 and PTX)

 

If authentication is set the program establishes a link to the machine via Windows protocols.

 

Check / uncheck the box to set the parameter

 

tickbox9.gif Authentication required

 

User name and Password

 

If Authentication is required use the boxes to enter an optional user name and password.

 

User name: MyMachine1

Password:  ********

 

 

See also