Use pattern colours in export file (saw transfer)

 

Saw transfer parameter to set the operation of Pattern exchange transfer

 

The parameter is shown on the right hand pane at the saw transfer parameter screen and is only required for some saw modes. Select the correct saw mode(s) before attempting to set this parameter.

 

Saw Transfer modes 11 and 12 only

 

This value sets whether colour shading is used in the image files exported for each pattern. If colour shading is not used any waste and offcuts are represented by cross-hatching

 

- Check / uncheck the box to set the parameter

 

tickbox9.gif Use pattern colours in export file

 

 

See also