Machining centre parameter for tooling instructions for offcuts
For nested patterns, for offcuts, enter the tool number, speeds, and other rout tool box options.
Use the command format, with each option separated by a colon character, for example:-
T=2:A=2:F=4
or
- Select the button to use the Tool dialog for entering setting information
This value can be overridden by Material parameter settings on a 'per material' basis
Notes
- Can also be set as a Material parameter at material level.
- Parameter is used where no MPR(X) offcut template is set (Nesting parameters)
- Parameter is used when the nested pattern format is 'Machining library' or 'MPR(X)'
