Drawing path - information box

 

Pre-defined information box (field) for nesting

 

Used to store a path and file name for each MPR(X) or DXF file.

 

At a part list:-

 

 Click on the Part list Description field

 Click on the select button in the cell

 

The program displays the part select dialog

 

 Click on the Change path button at the right

 Select a path and file for that part list drawing and the Selection dialog is updated.

 

Select parts as required. The path name is stored in the Drawing path - information box.

 

mct1891-02.png

 

Set up

 

To work in this way the program must be set up as follows:-

 

Drawing path - information box must be set (Information box parameters)

Part list properties must be set: File - Properties - Drawing source - MPR(X) files or DXF files

 

 

Notes

 

- When parts are added or changed via the Change button the part sizes are automatically updated from the MPR(X) or DXF file.

 

- Changing the Drawing path - information box directly has no effect - use the 'Change button'

- Each part list line can have its own Drawing path and MPR(X) or DXF  filename

 

- When the selection mode for parts is set to text mode (System parameters - Select using pictures - parts), a second column is displayed showing the date and time of the MPR(X) or DXF files.

 

 

See also