Maximum offcut dimensions - Nesting

 

Nesting parameter to set the maximum size in length and width for an offcut

 

mct2002-01.gif

 

Set this value to reflect the size of material that is the largest useful piece (offcut). A piece of waste is defined as an offcut by the following rules.

 

Longest side is less than the maximum size

Shortest side is less than the maximum size

 

- Enter values for the maximum length and width

 

 

Notes

 

- Can also be set as a material parameter at both board and material level

 

- The 'length' is the value in the part list column labelled 'Length'

 

- The 'width' is the value in the part list column labelled 'Width'

 

 

See also