Nesting system parameter to set the path for the path template
If the part list drawing source is MPR(X) and one or more parts are added to a part list without an associated MPR(X) file the part template is used to generate a drawing for these parts.
- Enter a path for the nesting part template
Click
on the 'List' button to browse directories
- Click on the 'Folder' button to 'run' the template
Notes
The part template must be setup so that three variables define the dimensions of the part using the nesting system parameters:-
Use set variables for MPR(X) dimensions
Dimension names (MPR(X))
The template must contain the same variable names (for length, width, thickness) as the system parameters (e.g. L, B, D)
Example
The part template is an MPR file.
[H
VERSION="4.0 Alpha"
OP="1"
WRK2="0"
SCHN="0"
O2="0"
O4="0"
O3="0"
O5="0"
FM="1"
ML="2000"
DN="STANDARD"
GP="0"
GY="0"
GXY="0"
NP="1"
NE="0"
NA="0"
BFS="0"
US="0"
CB="0"
UP="0"
DW="0"
MAT="HOMAG"
INCH="0"
VIEW="NOMIRROR"
ANZ="1"
BES="0"
ENT="0"
_BSX=600.000000
_BSY=600.000000
_BSZ=18.000000
_FNX=0.000000
_FNY=0.000000
_RNX=0.000000
_RNY=0.000000
_RNZ=0.000000
_RX=600.000000
_RY=600.000000
[001
L="600"
KM="length in X"
B="600"
KM="width in Y"
D="18"
KM="thickness in Z"
]1
$E0
KP NEST
.....
|