Menu option for machining
If the origin is changed (Machining centre parameters) this affects machining drawings. They may no longer be drawn correctly.
Use these options to adjust the drawing back to the original display.
At a machining drawing:-
● Edit - Invert instructions
or
● Edit - Reverse instructions
'Invert' is used when the origin has changed from the top to the bottom or from the bottom to the top and the instructions need inverting to get the drawing back to its original display.
The Reverse instructions is used when the origin has changed between left and right.
Notes
- These options can be used individually or together. For example, if the origin is changed from bottom left to top left only 'Invert instructions' is used.
- If the origin is changed from top right to bottom left both a 'Invert' and 'Reverse' are required (select one after the other)
- Any link(s) within a drawing are not processed completely and need to be manually edited afterwards.
- Invert/Reverse options are not available for template drawings.
