Board library field for the solidity of a material
This field is used to store the density of a material in either metric tons per m3 or pounds per ft3 depending on the current measurement mode.
The range of values is:-
Metric measurement mode: 0.000 - 99.999 tons per m3 (1 ton = 1000Kg)
Inches measurement modes: 0.000 - 99.999 pounds per ft3
Material weight fields - review runs and stock reports
Weight fields are available on the following reports.
Batch summary - Weight Parts field
Management summary - Weight field (Weight of offcuts, boards and parts)
Part summary - Weight field
Board summary - Weight field
Material summary - Weight Parts and Weight Boards fields
Offcut summary - Weight field
Saw loading summary - Weight field
Stock - Orders by material - Weight field
Stock valuation - Weight field
Monthly material report - Weight Parts and Weight Boards fields
The weight is kilograms or pounds depending on the current system parameter measurement mode. The weight field is located in the Available list in the report setting dialog.
If a material is specified that has no density set in the board library the weight = 0.
Weight is calculated as:
Area (board or part) x material thickness x quantity x material density
The weight is kilograms or pounds depending on the current system parameter measurement mode. The weight field is located in the Available list in the report setting dialog.
If a material is specified that has no density set in the board library the weight = 0.
Weight is calculated as:
Area (board or part) x material thickness x quantity x material density
(The material density is set at the Board library).
