Machining centre parameter - speed between part border routing
Enter the speed in linear measurement (e.g.: feet per minute, metres per minute).
This is the speed the machine moves between routing part borders or stay down / common edge contours.
Note:
For nested patterns the calculation of the dividing time is base on these parameters
- Loading time per board
- Time to take off each part
- Tool in/out (pattern dividing times)
- Cutting speed (pattern dividing times)
- Rapid Speed
The speed values in the machining library tooling options (e.g. Feed speed, spindle speed) are not used when calculating the pattern dividing times.
Notes
- Can also be set as a Material parameter at material level.