Max distance for single tab

 

Nesting parameter to set the maximum length of segment that can be held by one tab

 

maxdistanceof_tab.png

 

The 'Max distance for single tab' is used to enter a distance.

 

Any eligible side longer than that distance will have a minimum of two tabs.

 

A side is not eligible for a tab if it is adjacent to the edge of the board, or if the side is shorter than the specified tab length.

 

 

Notes

 

- Can also be set as a material parameter at both board and material level

 

- If the length of the segment is less than the tab length + 2 * Tool diameter then a tab will not be applied.