Routing / Nesting system parameter to set whether we use MPRX files
To be able to use MPRX files in the software woodWop 7+ and PRJXMGR.EXE need to be installed.
Once installed, the system parameter ‘Use ProjectX Manager’ located on the Routing / nesting tab needs to be checked.
Use
ProjectX manager
Notes
The software will now display both MPRX and MPR files for part selection. Nested patterns will be in MPRX format.
MPRXE files can be processed in the software when WoodWOP 8.0 and above is installed.
|