Length and width fields for parts
The part sizes are the Length and Width of the part. The length is usually the longest edge of the part and if the part is grained the length is the dimension running along the grain direction.
The width is usually the shortest edge of the part but if the material is grained the width is the dimension running across the grain direction.
These fields are used throughout the program where parts are viewed or edited.
Notes
- For One dimensional optimisers, such as the Ripping optimiser or the Cross cut optimiser, at the part list use the Global line to enter a fixed width or length.
- The order in which the length and width columns are displayed depends on the setting of the System parameter: Order of dimensions on screens and printouts for parts and boards.
