Unique code for the part material
The material codes are set in the Board library
Use
the List box for a list of material codes from the board library
Also use this code to identify a fitting or operation.
MFC18 - part
HB/3 - part
MDF-3/4 - part
- not defined
+HINGE2 - fitting (hardware)
-OP1 - operation
@MAT@ - @ variable
+HINGE2 - fitting
-PRESS - operation
The code field can also be left blank - which usually means that it is going to be set elsewhere, for example, at the Product using the part. The material can also be defined at the Part library by using a variable instead of a fixed value: e.g. @MATCODE@
Fitting (hardware) and Operation codes - If working with products enter a code to identify the item as a fitting or operation on a product. The fitting or operation code is up to 7 characters preceded by a (+) for fittings or a (-) for operations. Also a blank material code can be used (just enter + or -) for fittings or operations if the material code is not used
