Manual cutting

 

For Online label PC

 

This enables the operator to cycle through the cuts for a pattern with the cut line flashing on the pattern display to indicate the cut sequence.

 

To aid operation, next cut ('Cut') and next piece ('Piece') buttons are provided on the pattern display screen next to the cycle selector. The keyboard accelerators F9 and F10 can also be used respectively.

 

Only available for dimensions with sequence info (saw models 7 & 9)

Only the pattern being reviewed can be 'cut'

The book height for the cycle cannot be varied.

Next cut is allowed to advance to the next cycle number only

Next piece is not allowed to advance beyond the last cut of the cycle

 

The program stores the last cut taken against each cycle number. To reset this information and begin cutting the pattern afresh, decrease the cycle number until the following prompt appears. Clear patterns cut patterns for record - Reply Yes.

 

 

See also