Review runs option to set whether to show material units as a volume measurement
Typically fields involving boards and offcuts showing the amount of material used are expressed as Area (for example, square metres or square feet). In some cases it is preferable to use a volume measure (cubic metres or cubic feet).
Check / uncheck the box to set this
Use
Volume for boards and offcuts
If Volume is not selected the units used are Area
Applies only to the following summaries:-
- Batch summary
- Board and saw loading summaries
- Offcut summary
At the batch summary both volume and area fields can be selected if required - independently of this parameter setting.
See the topic: Global report settings
