Introduction
Setup & Networks
File management
Saw Optimising
Transfer to Saw
Nested optimising
Edging and Laminating
Forms and Labels
System set up (parameters)
Quotes and Orders
Products and Parametrics
Part library
Machining Interface
Material parameters
Stock control
Destacking and Palletising
CAD Drawing
Stand alone operation
Guides and updates
Errors
    Errors - Overview
    How to report a problem
    Program does not run
    Problems - printer paper size
    Buttons or links not working in Help pages
    Analysis of results and patterns
    Limits
    List of general errors
       A Copy/Convert will be performed after the restore
       Action not available
       Action not available - cutting list already divided
       Action not available - divided list
       Action not available - item is in use
       Action not available - part edging conflict
       Action not successful
       Action not successful - compact
       Action not successful - continue
       Action not successful - cannot update system parameters
       Action not successful - data not correct
       Action not successful - error reading file
       Action not successful - error writing file
       Action not successful - full path name
       Action not successful - file already exists
       Action not successful - file name
       Action not successful - global fields set
       Action not successful grain setting not supported
       Action not successful - locked
       Action not successful - master part name too long
       Action not successful - no data
       Action not successful - no information box for colour names
       Action not successful - no parts
       Action not successful - no pattern
       Action not successful - no printer installed
       Action not successful - no results
       Action not successful - no results from simulator
       Action not successful - not enough data
       Action not successful - not enough resources
       Action not successful - offcut names too long
       Action not successful - part locked
       Action not successful - printer name
       Action not successful - problem with open parts
       Action not successful - source and destination are the same
       Action not successful - too many parts
       Action not successful - too much group data
       Action not successful - too much data
       Action not successful - unique name too long
       Aggregate duplicate parts - no fields specified
       Alternative materials are ignored with current module settings
       Are you sure
       Batch board list has reached limit
       Barcode requires square area
       Board cannot be processed automatically by flexTec
       Board list rules - data not correct
       Board list rules - file too large or item of data too long
       Board list rules - line does not start with correct text
       Board list rules - no information box set
       Board list rules - no expression set
       Board list rule applied
       Board list rules - expression invalid
       Board rules - value must be numeric
       Border/Safety outside external border
       Borders overlap
       Border overlaps safety
       Busy - please wait
       Calculated field name is not unique
       Cannot add record
       Cannot Back-up - too many files
       Cannot create picking list - run name too long
       Cannot delete record
       Cannot embed template parts - pattern does not fit board
       Cannot merge quotes containing edited products
       Cannot open library
       Cannot optimise pallet groups with material override for saw blade thickness
       Cannot optimise zero rip/crosscut trims with tension trims
       Cannot overwrite file - an optimising parameter file of the same name exists
       Cannot overwrite file - measurement mode incorrect
       Cannot read record
       Cannot retrieve backup - backup belongs to a different user profile
       Cannot run program
       Cannot update record
       Column contains non numerical data
       Contour action not allowed
       Crosscut trims are ignored for rip only optimisation
       Current version cannot be updated
       Cutting is not complete
       Cutting list exists - Overwrite
       Cutting list must be saved before editing drawing - continue?
       Cutting list rule applied
       Cutting list rule expression invalid
       Cutting list and drawing changes exist. Overwrite?
       Data not correct
       Data not correct - additional information
       Data not correct - batch board list & offcut reuse
       Data not correct - blank code
       Data not found - board list
       Data not correct - Board length and orientation
       Data not correct - board list conflict
       Data not correct - board too large
       Data not correct - board too small
       Data not correct - Board width and orientation
       Data not correct - cannot insert tension trim
       Data not correct - calculation failed
       Data not correct - cannot embed template
       Data not correct - code
       Data not correct - conflict with group
       Data not correct - contains deleted parts
       Data not correct - core
       Data not correct - cut length and unders conflict
       Data not correct - cutting
       Data not correct - depth of saw bed
       Data not correct - duplicate code
       Data not correct - duplicate codes
       Data not correct - duplicate name
       Data not correct - duplicate quantities
       Data not correct - duplicate size
       Data not correct - duplicate title
       Data not correct - import format
       Data not correct - edge codes
       Data not correct - file conflicts
       Data not correct - fields for defining duplicate parts
       Data not correct - field too long
       Data not correct - filename
       Data not correct - full sheet overs
       Data not correct - global field set
       Data not correct - invalid code
       Data not correct - front laminate
       Data not correct - grain
       Data not correct - group transfer not supported
       Data not correct - invalid value
       Data not correct - library
       Data not correct - limits and sizes
       Data not correct - matching parts in strip and duplicates
       Data not correct - material
       Data not correct - material cost is zero
       Data not correct - material parameters
       Data not correct - material thickness is zero
       Data not correct - materials do not match
       Data not correct - maximum open parts
       Data not correct - maximum single recut
       Data not correct - maximum strip width
       Data not correct - measurement mode
       Data not correct - minimum cut size
       Data not correct - minimum first cut
       Data not correct - minimum last cross cut but one
       Data not correct - minimum last cut but one
       Data not correct - minimum last rip cut but one
       Data not correct - minimum last strips
       Data not correct - minimum length of head
       Data not correct - minimum length of main
       Data not correct - minimum length of parts
       Data not correct - minimum stack height
       Data not correct - minimum strip width
       Data not correct - minimum recut trim
       Data not correct - no boards
       Data not correct - no core length and width
       Data not correct - no data
       Data not correct - no sundry details
       Data not correct - not enough boards
       Data not correct - number of boards and limits
       Data not correct - offcuts
       Data not correct - open parts
       Data not correct - open parts and free cut
       Data not correct - open parts and limits
       Data not correct - optimiser type and grain match
       Data not correct - optimising details not complete
       Data not correct - optimising parameters
       Data not correct - Outfeed direction
       Data not correct - overall cut length
       Data not correct - parameter file type
       Data not correct - parameters
       Data not correct - part code
       Data not correct - part does not match
       Data not correct - part not produced
       Data not correct - part rotation
       Data not correct - part too large
       Data not correct - part too small
       Data not correct - parts
       Data not correct - parts do not fit length
       Data not correct - parts do not fit template
       Data not correct - parts do not fit width
       Data not correct - parts per pattern
       Data not correct - parts per strip
       Data not correct - path
       Data not correct - pattern has illegal recuts
       Data not correct - pattern has recuts in head
       Data not correct - pattern not checkerboard
       Data not correct - pattern too large
       Data not correct - patterns
       Data not correct - picture
       Data not correct - priority and open parts
       Data not correct - priority and pallet groups
       Data not correct - range
       Data not correct - recut setting
       Data not correct - recut too narrow
       Data not correct - retrims overridden
       Data not correct - run
       Data not correct - saw parameters
       Data not correct - select boards and limits
       Data not correct - strip too narrow
       Data not correct - strips per block
       Data not correct - template
       Data not correct - template material not grained
       Data not correct - template position
       Data not correct - template saw blade thickness
       Data not correct - template trims
       Data not correct - too many boards used
       Data not correct - too many composite boards
       Data not correct - too many different boards
       Data not correct - too many different parts
       Data not correct - too many edge codes
       Data not correct - too many global variables
       Data not correct - too many head cuts
       Data not correct - too many offcuts
       Data not correct - too many overs
       Data not correct - too many part sizes
       Data not correct - too many patterns
       Data not correct - too many template parts
       Data not correct - too many unders
       Data not correct - too many variables
       Data not correct - trim too large
       Data not correct - unequal recuts
       Data not correct - variable
       Data not correct - version conflict
       Data not correct - zero sized board
       Data not found - machine rates
       Delete - are you sure
       Directory has been locked by another user
       Download failed
       Drawing contains safety contour with no border contour
       Duplicate chart title
       Duplicate run
       Edging description too long
       Error
       Error obtaining update information
       Error inserting waste gap for tongue and groove
       Error pasting data - invalid value
       Error writing sequential number list
       Error uploading report
       Export not successful - file name
       Flat MPR tooling rules must be unique
       Field name used multiple times
       File name incorrect size or has spaces
       Field value invalid
       Field value invalid character
       Field value out of range
       Field value too long
       File not found
       Formula needs checking
       Front strip has recuts - insufficient space to insert extra trim
       Grain matching and recut processing conflict
       Grain matching not allowed with current module settin
       Head cannot be processed automatically by flexTec
       Imported boards - conflict with Optimise option
       Unable to print from multiple data sources
       Incorrect Unicode format
       Insufficient boards of valid width for crosscut optimisation
       Insufficient boards of valid length for rip only optimisation
       Insufficient free space
       Insufficient memory to render the 3D view
       Invalid field used in the formula
       Invalid path for pattern image files
       Invalid sort options - field repeated
       Invalid start template
       Invalid template details
       Item not correct
       Item not found
       Item not found - back laminate
       Item not found - board
       Item not found - code
       Item not found - directory
       Item not found - directory - create directory
       Item not found - drawing
       Item not found - edge type
       Item not found - formula
       Item not found - material
       Item not found - part
       Item not found - product
       Item not found - saw simulation data
       Item not found - Simulator model
       Item not found - template
       Item not found - using default
       Latest update has already been applied
       Link needs adding
       Link needs checking
       List is too large
       List too large - boards
       Lookup needs checking
       Machining library origin and part machine origin conflict
       Machining transfer mode not specified
       Machining too complex for DXF transfer
       Main cannot be processed automatically by flexTec
       Making changes which invalidate the patterns will delete the run
       Material / drawing thickness conflict
       Material details differ - board list material details will be used
       Materials details inconsistent
       Material parameter override value of priority mode is not valid
       Max main too short
       Maximum open parts and optimiser type conflict
       Maximum open parts and preference for fuller books conflict
       MDB field truncated
       Minimum / maximum offcut conflict
       Minimum part separation cannot be less than Diameter of cutting tool
       More than one safety per border
       MPR cannot be processed
       Multiple materials not allowed with board pre-cut
       No first part defined
       No data for this chart
       No entries for this summary
       No fields have been set for any of the grid columns
       No items in library
       No matching entries were found
       No valid orientation for board
       Not enough boards for mixed material pallet group
       Offcut(s) cannot be divided to fit manual storage area
       Offcuts cannot be divided to maximum dimension
       Only single field allowed for this chart type
       Optimising incomplete - pattern limit reached
       OpenGL version 3.2 or higher is required for the 3D view
       Original stock no longer available
       Outfeed direction is ignored with current module settings
       Part list is protected - continue?
       Part material code does not match the pattern
       Part position not correct for tongue and groove
       Part priority and preference for fuller books conflict
       Parts in template have different grain
       Password not correct
       Path already contains a user profile
       Path must be empty
       Path not accessible
       Part belongs to incomplete template
       Part cannot be processed automatically by flexTec
       Part material codes do not match pattern
       Part overlaps board edge
       Part overlaps critical waste margin
       Part overlaps margin
       Part position not correct
       Part position not correct for Priority mode
       Part priority and preference for fuller books conflict
       Part priority and sequence error
       Part too large for board pre-cut
       Part has multiple contours
       Part too large for nesting table
       Parts combined - product/variable link lost
       Parts in template have different materials
       Parts in template have incompatible quantities
       Pattern contains arcs - common edging not applied
       Pattern contains parts with mixed border directions
       Pattern contains parts with MPR(X) based borders
       Pattern limit for duplicate parts exceeded
       Parts in pallet group have different priorities
       Patterns exist - changing list deletes patterns
       Patterns exist - changing list may change patterns
       Please contact your distributor to obtain this update
       Polygon is not closed
       Preference for fuller books and optimiser type conflict
       Prefix is empty
       Prefix/Suffix must be non numeric
       Problem with printer
       Problem with settings - cutting list options
       Problem with settings - data and saw path
       Problem with settings - measurement mode
       Problem with settings - offcut pattern sort and part priority
       Problem with settings - paths are the same
       Product width undefined
       Product height undefined
       Product depth undefined
       Program cannot run - Security settings / Unknown error
       Program has insufficient rights to access the history folder
       Program is in use by another user
       Project Manager error
       Re-activation code is not correct
       Re-optimising will cause any previous edits to be lost
       Record contains invalid character
       Recut cannot be processed automatically by flexTec
       Replace existing data
       Rip trims not allowed for crosscut only optimisation
       Run name incorrect size
       Run name is too long to generate 8 digit pattern file names
       Safety is inside the border
       Saving the part list will remove any drawing changes made in the cutting list
       Saw model does not support waste parts
       Saw model / transfer mode does not support vertical strips
       Saw model / transfer mode - offcuts must appear at start of cutting phase
       Saw template requires saw optimiser
       Separate runs for offcut patterns - conflict with saw limit
       Separate runs for offcut patterns - conflict with offcut pattern position in run
       Small part too close to edge
       Sort offcut patterns / Override board loading sequence - may clash
       SQL reservation synchronisation request rejected
       Staggered head requires manual outfeed (angular saw with turntable)
       Strip cannot be processed automatically by flexTec
       Strip production error - patterns and optimiser type conflict
       Stock level below minimum
       Template master part too small
       Template master part too small - check template blade thickness and trims
       Tension trims in checkerboard blocks not supported for Cadmatic 3
       Tension trims in patterns with checkerboard sections
       Tension trims not calculated board trims too small
       The outermost border does not precede internal borders
       There is not enough room for the back-up file on the path for back-up
       This file is already open for editing
       This will lose product and variable information
       Tool sequence file missing
       Too many blocks for crosscut trim override
       Too many borders
       Too many cutting dimensions
       Too many instructions to sequence
       Too many instructions for 3D view
       Too many files selected
       Too many parts for crosscut trim override
       Too many recuts
       Too many strips for rip trim override
       Too many strips
       Topic not available
       Unable to add instruction with negative depth
       Unable to connect to printer - Do you want to clear it from settings?
       Unable to connect to Online
       Unable to connect to the internet
       Unable to convert MPRX files - conversion utility not found
       Unable to convert library file
       Unable to create internal safety
       Unable to find solution within free cut range
       Unable to find solution within board pre-cut range
       Unable to find solution with part priority and max open parts
       Unable to fit bar code details into specified dimensions
       Unable to generate common edge path for pattern
       Unable to generate stay down path for pattern
       Upgrade not found
       Unable to optimise - min pre-cut dimension is too large
       Unable to optimise - max pre-cut dimension is too small
       Unable to optimise - max board width is too small
       Unable to optimise - min board width is too large
       Unable to place connector on border
       Unable to perform operation - invalid angle between routs
       Unable to restore from a later version of the software
       Unable to render - Free form pocket overlap
       Unable to render pocket - radius greater than half length / width value
       Unable to render closed contour - Contour overlap
       Unable to render - Border overlap
       Unable to run - unsupported updates have been applied
       Unable to transfer image file
       Unable to update log file
       Unable to restore selected batches from an earlier version
       Unable to transfer - multiple runs for one cutting list
       Unicode format not supported
       Updates are not currently available - please try later
       Variable needs checking
       Warning
       Warning - multiple runs for one cutting list
       Your security key expires soon
       Your software support expires soon
       Your software support has expired
       3D view instruction width must be greater than zero